NYTE3D model 3D-printing resin

3D-printing material for dental models

Short exposure time

A short exposure time gently treat the light and imaging unit of your dental 3D printer. The economic efficiency increases.

Very hard models

The models are extremely hard after the printing process and the post-exposure. This leads to perfect working properties of the prints.

Various colours

The NYTE3D model 3D-printing resin is available “sand”, “grey” and “night” coloured.

High material reactivity

Time-sensitive projects can be printed in no time at all.

Very liquid

The NYTE3D model 3D-printing resin has a low viscosity. The advantages: faster printing process ways, easy cleaning and lower material consumption.

Finest details

Short exposure times, a high opacity and a high reactivity ensure that defined edges can be printed precisely and at least smallest details can be replicated.

Colour

sand

Colour

grey

Colour

night

NYTE3D model 3D print for perfectly-fitting dental models

The NYTE3D model was developed especially for dental laboratories and can be used in devices with a wavelength of 385 nm and 405 nm. You can freely decide if you use the material in a LCD printer or a DLP printer.

To fulfill all requirements of digital model making, we have cooperated with dental technicians and other experts. The result is a dental model material for making crowns, bridges, aligner models, prosthetic models, diagnostic models and implant models.

Compatible 3D-printers

Technical data

  • 3,5 % Flexural stress

    65,7 ± 3,4 MPa

  • Flexural strength

    71,2 ± 4,2 MPa

  • Flexural strain

    4,93 ± 0,13 %

  • Flexural modulus

    2484 ± 145 MPa

  • Shore hardness D

    90 ± 1

  • Viscosity

    220 mPa·s

  • Wavelength range

    385-405nm

Excellent properties

Print economically and accelerate the printing processes

The most stressed component of your 3D printer is the light and imaging unit. In most of the cases, this is a LED panel in combination with a monochrome display (MSLA printer) or a projector (DLP printer). Thanks to the high reactivity of our model material, the exposure times of your printer can be reduced considerably and more models can be printed with a reduced machine load. The economic efficiency increases!

The significant reduction of the exposure time shortens the printing process.

Hard and dimensionally stable models

The volume of the printed model typically decreases during the printing process and the post-exposure and it shrinks. Due to the choice of high-quality raw materials and the quite easy finishing procedure of the printed objects, the NYTE3D model shrinks only marginally. Nonetheless, the printed objects have a high shore hardness so that they can be processed perfectly.

Easy finishing procedure and fast printing processes thanks to a low viscosity

Do you know the following problems?
  • You cannot print faster because the material flows back very slowly
  • Cleaning of the printer cartridge and the building platform is work-intensive and time consuming
  • There are residues of washed-up resin in the ultrasonic bath. Therefore, the material consumption increases and the objects may show an unpleasant coating after the cleaning
  • All of these problems which were brought to our attention by dental technicians are due to a high material viscosity. The low material viscosity helps to make the finishing procedure easier and to reduce ineffective times.

High opacity for easy-to-recognise details

For being able to recognise all the finest details on the surface of the dental models, a surface as opaque as possible is required. But the necessary material components may have a negative influence on the printing properties. Due to specially developed procedures, we can ensure having not only perfect printing properties, but also a high opacity.

Compatible 3D printers

"Since I use NYTE3D model, there are no misprints anymore. Especially while treating time-sensitive projects and in peak times, I am more than happy being able to print the incoming scans quickly and easily."

Ömür Pak
Oraldesign Pak

Compatible 3D printers

The NYTE3D model 3D printing resin can be used in devices with a wavelength of 385 nm and 405 nm. Therefore, it covers the most common 3D printers in the dentistry. Feel free to ask us about the printing parameters.

Your 3D printer is not listed? Just ask us if your printer is compatible.

Of course, we or one of our partners may help you to find the perfect printer setting of your dental 3D printer. Just give us a call.

We have already tested part of the following printers:

Anycubic

  • Photon Mono X
  • Photon Mono
  • Photon Mono SE
  • Photon S
  • Photon Zero
  • Photon

Asiga

  • Max-Series
  • PRO 4K

Elegoo

  • ELEGOO Mars 3 ULTRA
  • ELEGOO Mars 2 Pro
  • ELEGOO Mars Pro
  • ELEGOO Saturn

Miicraft

  • PRIME
  • Ultra
  • Profession

Rapidshape

  • D10+
  • D20+
  • D30+
  • D30+ ortho
  • D40 II
  • D70+
  • D90+
  • D100+

Creality

  • LD-002R UV
  • LD-002H UV
  • LD-006 UV
  • HALOT-ONE UV
  • HALOT-MAX
  • HALOT-SKY UV

Phrozen

  • Shuffle Series
  • Sonic Series
  • Sonic Mini Series
  • Sonic Mighty Series
  • Sonic MEGA 8K

Ackuretta

  • DENTIQ
  • Freeshape 120

UNIZ

  • SLASH 2
  • SLASH 2 PLUS
  • SLASH 2 PRO
  • IBEE

Flashforge

  • Hunter
  • Foto 6.0
  • Foto 8,9
  • Foto 8,9s
  • Foto 13.3
  • Focus 8.9

EPAX

  • E10
  • E6
  • X156
  • X133
  • X10
  • X1

Qidi Tech

  • Shadow 5.5 S
  • Shadow 6.0 Pro
  • I-Box Mono

Nova3D

  • Whale 2
  • Elfin2 MONO SE
  • Elfin3 Mini
  • Bene4 Mono
  • Bene4
  • MARS
  • GEM
  • VENUS

Sprintray

  • Moonray

Zortax

  • Inkspire

Yidimu

  • Falcon 5.5 inch
  • Falcon S 8.9 inch 4K
  • Falcon Pro 10.1 inch
  • Falcon Plus 13.3 inch 4K
  • Falcon Max 15.6 inch 4K

Monoprice

  • Mini SLA LCD

Peopoly

  • Phenom
  • Phenom L
  • Phenom Noir
  • Phenom Prime
  • Phenom XXL

Sparkmaker

  • PrintHero 4K
  • Sparkmaker FHD
  • SparkMaker Original

Lumi

  • Lumi³ (LumiCube)

Photocentric

  • LC Magna
  • LC Dental

Prusa

  • SL1
  • SL1S

Longer

  • Orange 4K Mono
  • Orange 30
  • Orange 10

XYZ Printing

  • Nobel 1.0
  • Nobel 1.0 A
  • Nobel Superfine

You might also be interested in these materials

More efficient and economical 3D printing with materials from NYTE3D